DLS Access Point

DLS E325N Long Range Access Point combines carrier class performance unlimited scalability and a virtual management controller. Unlike Traditional Enterprise WiFi System Utilizing a Hardware WiFi Switch DLS uses a Virtual Client Server Application that requires Zero Cost and no Additional Features Saving both Time & Money. DLS E325N are also Aesthetically Pleasing Utilizing a Single LED Ring/Pentagon Light to Indicate the Unit whether it is Online or Offline. Conveniently Mountable on a Ceiling, Further no Limit to the number of Access Points that can be Linked through Ethernet or Wirelessly Extended. DLS e325N are Power over Ethernet (PoE), Hence 5 amp or 15 amp Plug and Power Adapter not Required.

Watchdog Technology Chipset
Wlan Soc
533 Mhz
Max 300Mbps

Three Color Indicator Light
Using High End Seven Color Chip
Ultrathin Ceiling Appearance Point
Open WRT Program Architecture
Compatible with most of the Software

PoE Support
18dBi Antenna
32M DDR / 8M Flash
300Mbps Transmission Speed
Compatible with most of the Software

WIFI to Hotel Room
PoE Support
Wired to Wireless
RJ45 Port High Spped for Corporate's
Support RJ11
Support Private Network or Mobile Charger
Supports Both Wireless & Wired Network

DLS P7PoEConfiguration
DLS 8 Port Gigabyte Switch8 switch ports with 10/100/1000Mbs auto detect operation with status LED
Power Supply Options 18, 24, 48, 56 Volts
30, 60, 120 Watts
220 - 240V AC, 50 / 60Hz High Efficiency
7 PoE Ports, Both A & B Mode Mode A Power and Data on Pins 12 (-) & 36 (+)
Mode B Power or Pins 45 (+) and 78 (-) with
Data on pins 12 ,36,45 & 78
Dual PTC fuses on each PoE output port One 650 ma fuse per port for Mode A
One 650 ma fuse per port for Mode B
18v to 56v OperationFunction Switch On/Off Mode A/B
Power Supply Inputs 2.1mm Power Connectors, Center Positive
Mode A & B Input with LED status
LED Indicates 18 / 24V or 48/56V Operation
Maximum Input Current per Mode – 2.5 amps
Mode B PoE power Input from the Uplink Port – 1 amps max
Dual Power supply operation Redundancy - 48v 802.3af only – see text
Load balancing – 48v 802.3af only – see text
Mixed voltage – Mode A at 48v and Mode B at 24v – see text
Uplink Port 10/100/1000 Mbs No PoE Voltage Out
Auto Detect 568 A or 568 B Connections
802.3af Emulation(On, No Autonegotiation)48V in Either A or B Modes

* Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Copyright © 2017, Innosoft Datalinks Private Limited, All rights Reserved. (This Web site is best viewed using IE version 9.0 or higher and updated version of all modern browsers) Sitemap | Disclaimer

Design by